RS Fireplace / Chimney Fans |
 Wind Tunnels often
exist in New York City when a tall building is adjacent to a smaller
building providing the perfect environment for wind tunnels and severe
downdrafts. These wind tunnels and downdrafts are what cause your
fireplace to smoke back, filling your room with smoke in just seconds
without any warning.
Nationwide Chimney & Fireplace has a solution to this problem and its called “Negative Pressure”.
Negative pressure is created by a draft inducer located at the
Apex of your chimney termination point which enables your fireplace to
operate at all times no matter what the wind condition is or the
location of the building.
Negative and positive pressures are
created by temperature conditions. Cold conditions will cause a
downdraft in a chimney where as the cold air will descend down the
chimney creating a positive pressure and resulting in a wind tunnel that will blow air in instead of exhausting it out through the chimney. Negative pressure will
remove the air from your fireplace and exhaust it to the chimney
allowing it to disburse properly into the atmosphere.
We
have an area in our web site that shows the type of draft inducer and
all the available sizes. For additional information or to set up
an appointment with a qualified technician please call our trained
staff at 800-830-9866.
- Mechanical draft fan for installation at the chimney termination point, vertically or for side-wall venting.
-
Assures a negative pressure in the entire chimney or stack system.
Discharges horizontally (vertically, if sidewall vented) at a high
velocity.
- The Exhausto fans housing is hinged and the top can be opened for easy service and access to stack.
- For use with gas, wood, coal, pellets, oil, and others.
|
|
Standard Equipment
2"x 4" or 4"x 4" junction box with cover and conduit
Fiber Mat and Mounting Brackets
Bird Screen
5 Amp Fan Speed Control
Optional Equipment
Fan Proving Switch
Listings
ETL listing #E109205550D
UL378 - Draft Equipment
CSA-CAN3-B255-M81 -
Mechanical Flue Gas Exhausters
| Approvals
CE Compliant
City of New York Department of Building
City of Los Angeles
The Commonwealth of Massachusetts
(G1-1295-29)
Warranty
2-year factory warranty on entire Exhausto fan.
10-year warranty against corrosion perforation.
Manufactured at ISO9001 certified plant.
|
| Material
Exhausto
fans housing is made of cast aluminum with a thickness of 3/16" and is
extremely corrosion resistant. One coat of grey hammer-paint finish is
applied.
Axial vanes in stainless steel, dynamically and statically balanced to assure low noise level and vibration-free operation.
Motor
Split capacitor, totally enclosed. Class H insulated, IP54
Protection Class. Sealed ball bearings. Variable Speed.
Thermal overload protection. |
| Specifications |
4 sizes RS 009, RS 012, RS 014, RS 016 |
|
|
To view our fireplace photo gallery of projects we have completed... Click Here.
|
